APEX AL9LC Floorplate Low-Ceiling 2 Post Lift 9,000 lbs
$3,895.00
APEX AL9LC Floorplate Low-Ceiling 2 Post Lift 9,000 lbs is part of our 2 post lifts selection from Apex.
- Lifting capacity: 9000 lb
7 in stock
APEX AL9LC Floorplate Low-Ceiling 2 Post Lift 9,000 lbs
APEX AL9LC Floorplate Low-Ceiling 2 Post Lift 9,000 lbs is part of our 2 post lifts selection from Apex.
Match the lifting system to the vehicle or load, the service task and the available workspace. Check rated capacity, lift-point compatibility, slab requirements and installation clearances.
Equipment details
- 9,000-lb Lifting Capacity Handles passenger vehicles, performance cars, and light trucks with confidence
- Floorplate Two-Post Design Ideal for low-ceiling garages while maintaining full lifting capability
- Symmetric and Asymmetric Arm Configurations Allows flexible arm positioning for faster vehicle setup
- Triple-Telescoping Front Arms and Extended Rear Arms Provides exceptional reach for a wide range of wheelbases
- Automatic Safety Locks Every 3 Inches Ensures secure load holding throughout the lift range
- Automatic Arm Restraints Prevent unintended arm movement during service
- Heavy-Duty 6" x 6" Tubular Steel Carriage Delivers long-term structural strength and durability
- Chain-Over Lifting System Industrial-grade leaf chain engineered for reliable, low-maintenance operation
- Oversized Base Plates Improve stability and evenly distribute vehicle weight
- Exact manufacturer model or part number: 5176250
Check the configuration
Use the Additional information tab to review the listed specifications. Confirm the model, included components and site requirements against the manufacturer documentation before ordering. Optional accessories or configurations must be identified separately; an image alone does not establish what is included.
| Brand |
Apex |
|---|---|
| MPN / Model |
5176250 |
| Condition |
New |
| Model |
AL9LC |
| Lifting Capacity: (*) |
9,000 lbs. (4,082 kg) |
| *Max Capacity / Front Axle |
4,500 lbs. (2,045 kg) |
| *Max Capacity / Rear Axle |
4,500 lbs. (2,045 kg) |
| A Height Overall |
109.5" (2,781 mm) |
| B Width Overall (at Baseplate) |
137.5" (3,492 mm) |
| C Width Outside of Columns |
127.5" (3,238 mm) |
| D Floor To Driveover Height |
1.25" (30 mm) |
| E Width Inside Columns |
113.5" (2,880 mm) |
| F Min Front Arm Reach |
22.5" (571 mm) |
| F Max Front Arm Reach |
43.25" (1,099 mm) |
| G Min Rear Arm Reach |
33.5" (845 mm) |
| G Max Rear Arm Reach |
53.25" (1,353 mm) |
| H Min. Pad Height |
3.9" (100 mm) |
| Screw Pad Adjustment |
2" (51 mm) |
| Max. Load Per Arm |
2,250 lbs. (1,023 kg) |
| I Rise Height |
70" (1,778 mm) |
| J Max. Lift Height (Pad + 63mm Adapt.) |
76.5" – 78.5" (1,943 – 1,994 mm) |
| K Drive-Thru Clearance |
103" (2,618 mm) |
| Time to Full Rise |
65 seconds |
| Motor |
220 VAC / 60Hz / 1 Ph |
| Shipping Weight |
1,385 lbs. (630 kg) |
| Lifting capacity |
9,000 lb |
| Lift type |
2 Post Lifts |
| Phase |
Single phase |
| Voltage |
220 V |
Free shipping across the USA
Heavy equipment shipping generally takes 10 to 21 days after order placement. Small items may travel by parcel carrier; larger machines and trailers require freight coordination.
Use a physical delivery address and a reachable phone number. For freight deliveries, tell us about receiving hours, truck access, forklift or dock availability, and any unloading requirements. A delivery appointment may be required.
Inspect the shipment before signing where possible. Photograph damage, retain all packaging and pallets, and report freight damage within 48 hours. Contact us before returning any equipment.
