APEX AL10C Clearfloor Two-Post Lift, 10,000 lb.
$4,195.00
Clearfloor two-post vehicle lift with a 10,000 lb capacity, direct-drive hydraulic system and 208–230V single-phase power. The APEX AL10C provides open floor access beneath the vehicle for professional shops and serious garages.
8 in stock
APEX AL10C Clearfloor Two-Post Lift
The APEX AL10C is a clearfloor two-post lift for professional shops and serious garages. Its 10,000 lb capacity, open floor area and direct-drive hydraulic design support routine service work on passenger vehicles, performance cars and light trucks.
Verified specifications
- Manufacturer: APEX by BendPak
- Model / manufacturer SKU: AL10C / 5176251
- Lifting capacity: 10,000 lb
- Rise: 70 in; maximum lift height with pad: 76.5 in
- Lifting time: 65 seconds
- Overall dimensions: 148 in high × 137.5 in wide
- Drive-through clearance: 103 in
- Arm reach: Front 22.5–43.25 in; rear 33.5–53.25 in
- Motor and power: 5 HP, 208–230V, 60 Hz, single-phase
- Shipping: Flatbed; manufacturer lists a forklift offload requirement
Installation and fit
Confirm vehicle lifting points, pad height, ceiling clearance, concrete and anchoring requirements, electrical service, delivery access and local code requirements before ordering. The manufacturer lists a four-piece 63 mm stackable adapter set for this model; optional accessories are not included unless the product record specifically identifies them.
Manufacturer reference
| Brand |
Apex |
|---|---|
| MPN / Model |
5176251 |
| Condition |
New |
| Model |
GP-10C |
| Lifting Capacity: (*) |
10,000 lbs. (4,536 kg) |
| *Max Capacity / Front Axle |
5,000 lbs. (2,268 kg) |
| *Max Capacity / Rear Axle |
5,000 lbs. (2,268 kg) |
| A Height Overall |
148″ (3,759 mm) |
| B Width Overall (at Baseplate) |
137.5″ (3,492 mm) |
| C Width Outside of Columns |
128.5″ (3,264 mm) |
| D Floor to Overhead Switch Bar |
142.5″ (3,619 mm) |
| E Width Inside Columns |
114.5″ (2,908 mm) |
| K Drive-Thru Clearance |
103″ (2,618 mm) |
| F Min Front Arm Reach |
22.5″ (571 mm) |
| F Max Front Arm Reach |
43.25″ (1,099 mm) |
| G Min Rear Arm Reach |
33.5″ (845 mm) |
| G Max Rear Arm Reach |
53.25″ (1,353 mm) |
| H Min. Pad Height |
3.9″ (100 mm) |
| I Rise Height |
70″ (1,778 mm) |
| J Max. Lift Height (Pad + 63mm Adapt.) |
76.5″ – 78.5″ (1,943 – 1,994 mm) |
| Screw Pad Adjustment |
2″ (51 mm) |
| Max. Load Per Arm |
2,500 lbs. (1,134 kg) |
| Time to Full Rise |
65 seconds |
| Motor |
220 VAC / 60Hz / 1 Ph |
| Shipping Weight |
1,545 lbs. (703 kg) |
| Lifting capacity |
10000 lb |
| Lift type |
2 Post Lifts |
| Phase |
Single phase |
| Voltage |
220 V |
Free shipping across the USA
Heavy equipment shipping generally takes 10 to 21 days after order placement. Small items may travel by parcel carrier; larger machines and trailers require freight coordination.
Use a physical delivery address and a reachable phone number. For freight deliveries, tell us about receiving hours, truck access, forklift or dock availability, and any unloading requirements. A delivery appointment may be required.
Inspect the shipment before signing where possible. Photograph damage, retain all packaging and pallets, and report freight damage within 48 hours. Contact us before returning any equipment.
